Description

The3500/40M Proximitor Monitoris a four-channel monitor that accepts input from Bently Nevada proximity transducers, conditions the signal to provide various vibration and position measurements, and compares the conditioned signals with user-programmable alarms. The user can program each channel of the 3500/40M with the 3500 Rack Configuration Software to perform any of the following functions:

Radial vibration

Eccentricity

REBAM

Thrust position

Differential expansion

The primary purpose of the3500/40MProximitor Monitoris to provide the following:

Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms

Essential machine information for both operations and maintenance personnel

Each channel, depending on configuration, typically conditions its input signal to generate various parameters called static values. You can configure alert setpoints for each active static value and danger setpoints for any two of the active static values.

Alarm Setpoints

Use Rack Configuration Software to set alert levels for each value measured by the monitor and Danger setpoints for any two of the values measured by the monitor.

Alarms are adjustable from 0 to 100% of full-scale for each measured value. However, when the full-scale range exceeds the range of the transducer, the range of the transducer will limit the setpoint.

Compliance and Certifications FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

EMC

European Community Directive: EMC Directive 2014/30/EU

Standards:

EN 61000-6-2 Immunity for Industrial Environments

EN 61000-6-4 Emissions for Industrial Environments

Electrical Safety

European Community Directive: LV Directive 2014/35/EU

Standards: EN 61010-1

RoHS

European Community Directive: RoHS Directive 2011/65/EU

Maritime

ABS-Marine and Offshore Applications DNV GL Rules for Classification – Ships, Offshore Units, and High Speed and Light Craft

Ordering Considerations

General

The 3500/40M Module requires the following (or later) firmware, and software revisions:

3500/01 Software – Version 2.50

3500/02 Software – Version 2.20

3500/03 Software – Version 1.21

When ordering I/O Modules with External Terminations the External Termination Blocks and Cable must be ordered separately for each I/O Module.

External Termination Blocks cannot be used with Internal Termination I/O Modules.

Internal Barrier I/O Modules

Consult the 3500 Internal Barrier specification sheet (document 141495) if the Internal Barrier Option is selected.

REBAM

The REBAM channel type requires the following (or later) firmware, and software revisions:

3500/40M Module Firmware – Revision 2.1

3500/01 Software – Version 3.30

3500/02 Software – Version 2.40

3500/03 Software – Version 1.40

DM2000 Software-Version 3.40.

Requires the M version of the 3500 Proximitor Monitor.
Related product recommendations:
Bently Nevada 3500/40 176449-01
Bentley Nevada 200152-15-00
Bently Nevada 330103-00-20-10-02-00
Bently Nevada 330103-A00-B10-C10-DO2-E00
Bently Nevada 135613-02
Bently Nevada 330903-00-09-10-02-CN
Bently Nevada 3500/72M
Bently Nevada 330103-09-15-05-02-00
Bently Nevada 330103-00-06-50-02-00
Bently Nevada 81725-02
Bently Nevada 330103-00-05-10-02-00
Bently Nevada 3500/15
Bently Nevada 3500/40 
Bently Nevada 990-05-XX-01-00 165335-01
Bently Nevada 1900/65A-01-02-01-00-00
Bently Nevada 330173-00-18-10-02-05
More…