Interconnect Assemblies

Trident baseplates within a single I/O column are connected by Interconnect Assemblies that carry I/O messages and logic power across the baseplates. The MP Interconnect is connected to an I/O baseplate, and the I/O Interconnects are connected to other I/O Baseplates.

MP Interconnect Assembly

Physically, an MP Interconnect Assembly consists of a small passive PCB in a molded plastic housing with two DIN-C 96-pin male connectors. The assembly is attached to the top or bottom of an MP Baseplate in order to connect adjacent I/O Baseplates. The MP Interconnect Assembly also is used on AI and AO HART Baseplates because they are the same size as MP Baseplates.

I/O Interconnect Assembly

Physically, an I/O Interconnect Assembly consists of a small passive PCB in a molded plastic housing with two DIN-C 96-pin male connectors. The assembly is attached to the top or bottom of an I/O baseplate in order to connect other I/O Baseplates.

Required Accessories

The following accessories are required to protect Trident components from dust, liquids and corrosive atmospheres:

• End caps

• Terminal covers

• Slot covers

End caps protect the top and bottom of each end-of-column baseplate and serve as a card guide. They are available for both MP Baseplates and I/O Baseplates.

Terminal covers protect any terminals on a baseplate that are not connected to field wiring.

Slot covers protect unused baseplate slots.
Related product recommendations:
Allen Bradley IR46829982M90-110/132
Rockwell Automation 2071-AP4
K&S AS-261-0-02
Bently Nevada 3300/30
GE IC756WDJ009K-23
Emerson 8034-CC-128000IS
Allen Bradley 837-A9AX706
Yokogawa ATI3S-00 S2
ControlTech EE-4596-211-009
SIEMENS SIMATIC HMI TP900
ABB INNPM22
AB 1792D-4BV0D
A-B 800TC-H3216A30mm
Tellabs 9195 Network Telecom
WOODWARD 5461-117
Yokogawa TYPE-DU-2
More…….